Trane Performance Air Handlers Installationshandbuch PDF herunterladen (Seite 30)

30 CAH-SVX01B-EN

Installation - Mechanical

TCP Base-to-Interior Wall Section Assembly

Note: Failure to completely compress the gasketing may result in air leakage.

1. Join the two units and secure with field provided 5/8-inch flat washers and 5/8-inch X 2-1/2-inch

grade 9 bolts though each of the six holes.

2. Apply caulk the length of the base between the 2-inch X 2-inch angle on the one base section

and the wall on the adjoining section. See Figure 17 below. Note: Use a polyurethane or

equivalent caulk.

3. Secure the 2-inch X 2-inch angle to the adjoining wall with #14 sheet-metal crews on 12-inch

centers along the length of the angle and wall.

Figure 17. TCP base-to-interior wall sections

Interior

wall

4-in. x 1/4-in. gasket

Secure 2-in. x 2-in. angle to wall

with #14 SM screws at 12-in. centers

Caulk

Split

Interior

wall

Caulk

Split

Base-to-Wall Assembly Complete

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 99 100

Keine Kommentare

Trane Performance Air Handlers Installationshandbuch Seite 30