16PG 16Notes on your systemCustomer support:877-254-5625 or www.LockStateConnect.com 1PG 1LS-90 Installation Guide • Your
2PG 2You will need a small Phillips screwdriver and a drill with 3/16-in. (4.8mm) bit for wall mounts.Replacement installations - mount the LS-90 in p
4PG 4What wires do you have?Make sure your wires are labeled. This may require you to nd the ‘other end’ connection for each wire on your heating or
6PG 6Mount the LS-90 to wall1. Hold the LS-90 against the wall, with the wires coming over the top above terminal block. The LS-90 will cover the hole
8PG 8SET-UP for NORMAL A/C cooling systems: 1. Press MENU and then touch HVAC SET-UP.2. Touch and highlight COOL in the upper left corner of the displ
10PG 10Congratulations, you have successfully installed your unit. Please proceed to the OPERATING Guide to initialize the LS-90. IMPORTANT: After you
12PG 12Humidifi er -To use the /6 internal humidistat to control an external humidifi er unit, connect it as shown. Connect the H terminal to the con
14PG 14Zoned Systems ReferenceYour Wires Radio Thermostat Terminal2 wire Zoned Hot Water R RHW W3 Wire Zoned Hot Water Motor Driven
Kommentare zu diesen Handbüchern